The ease of this purchase was a good start. The content of this manual was exactly all I needed to retore my Tandberg 64.
All of the mechanical and electrical information is contained in the manual and the quality of the document makes reading the data easy.
The exerience with the resource has made this my prime source for technical data.
I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
Text excerpt from page 5 (click to view)
3. Mac (Memory All Clear) operation
Procedure A (1) Plug the power cord into an outlet. (2) Pressing the FEED button and turn the mode switch to PRG position. (3) Release the FEED button. After few seconds, MAC operation will be executed. (4) The following receipt will be issued, if completed. Procedure B (1) Remove the power cord from AC outlet. (2) Remove the memory protection batterey. (3) Leave the machine for few minutes. (4) Plug the power cord to AC outlet and then MAC operation is executed. (5) Set the memory protection battery.