Manuals were delivered promptly and were correct as advertised. No issues with the download link which was provided promptly after everything was processed. Very pleasant experience
Great service manual. Unfortunately on page no. 41 there are some details which i can't read.
Text excerpt from page 32 (click to view)
17. DISASSEMBLY PROCEDURE
1. Remove the battery cover, batteries and ink ribbon cassette. 2. Loosen 9 screws ¬ on the lower case ®, and open the lower case. 3. Remove 6 wires from the buzzer � and battery terminals with the help of fusing these welds. 4. Take out the connectors CN3 and CN4 on the PCB-1 ass�y 1, and loosen 3 screws x on the PCB1 ass�y. 5. Take the FPC tape of chassis ass�y D away from PCB-1 ass�y 1, and loosen 2 screws | on the PCB-1 ass�y 1. 6. Loosen 10 screws | on the PCB-E4 ass�y 4, 2 screws | on the LC holder 0. Then remove the PCB-1 ass�y 1 and the PCB-E4 ass�y 4 from the upper case t. 7. Loosen 3 screws x on the chassis ass�y D and take the chassis ass�y away from the upper case t. 8. Take out the spring I and remove the tape holder ]. 9. Loosen 2 screws W on the scissors sub ass�y G, and take out the spring J. Then remove the scissors sub ass�y G. 10. Loosen 4 screws x on the dial holder b, and take out the dial elements.
