The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
Text excerpt from page 45 (click to view)
BASIC IMAGE RECORDING
Using the Flash
Perform the following steps to select the flash mode you want to use.
5. Record the image.
IMPORTANT! � The flash unit of this camera fires a number of times when you record an image. The initial flashes are pre-flashes, which the camera uses to obtain information it uses for exposure settings. The final flash is for recording. Make sure that you keep the camera still until the shutter releases. � Image recording may not be performed if you press the shutter release button while the operation/flash charge lamp is flashing amber. NOTE
Select this setting: Auto
1. In the REC mode, press [MENU]. 2. Use [ ] and [ ] to select the �REC� tab. 3. Use [ ] and [ ] to select �Flash�, and then
press [ ].
4. Use [ ] and [ ] to select the flash mode you
want, and then press [SET].
To do this: Have the flash fire automatically when required (Auto Flash) Turn off the flash (Flash Off) Always fire the flash (Flash On) Fire a pre-flash followed by image recording with flash, reducing the chance of red-eye in the image (Redeye reduction). Have the flash fire automatically when required.
� You can use the key customization feature (pages 66, 67) to configure the camera so the flash mode changes whenever you press [ ] and [ ], or [ ] and [ ] while in the REC mode.
