excellent work as always you do cheap, fast net and clean. you do an incredible service......thanks!
Text excerpt from page 19 (click to view)
Subject Initial setting
Operation Connect the power unit, checking jig, or necessary devices defined in each program. Apply the power and press the POWER button.
Starting test program
Unit emits a buzz and ON Status screen appears on the display. Menu 1 screen appears on the display
Press ENTER button. * Refer to page 18 "To Start the Test Program". 3 Changing the menu screen Press "F3" to advance the menu screen. To turn back the menu page, press "F2". * Refer to page 18 for the menu screens. Select the program number on the menu screen. Follow guidances or messages which may be shown on the display. F6 button: Contrast down F7 button: Contrast up
Starting the test program
When programs come to the end without an error..... To proceed to other tests, repeat the above operations 3 and 4.
The unit resumes the starting menu screen on the display.
When an error occurs...
The unit emits a buzz and the display shows an error code. * Refer to the error code message on page 35. Press "CLEAR" button. The display resumes the menu screen.