The users guide was excellent. It provided the information neeeded to connect and control the Crate system. Nothing was left to chance
Text excerpt from page 16 (click to view)
Basic Operation
To adjust the volume of the main tone
To adjust the volume of the layer tone
1 2 3
Hold down the SETTING button, and keep it depressed until you reach step 4 of this procedure. Press the GRAND PIANO 1 button.
� This causes the indicator lamp above the button to flash.
1 2 3
Hold down the SETTING button, and keep it depressed until you reach step 4 of this procedure. Press the GRAND PIANO 2 button.
� This causes the indicator lamp above the button to flash.
Use one of the procedures below to set the main tone volume to a value in the range of 40 to 127.
� To scroll the volume setting value: While holding down the SETTING button, use the + (increase) and � (decrease) keys to scroll the volume setting value. Holding down either key changes the setting at high speed. Pressing + and � at the same time automatically selects a volume setting value of 127. � To input the volume setting value: While holding down the SETTING button, use the number input keys to input a two-digit or three-digit volume setting value in the range of 40 to 127. You can input a two digit or a three-digit value. The level you input is applied to the volume setting value when you release the SETTING button. The volume setting does not change if you input a one-digit value or a value that is outside of the allowable range.
Use one of the procedures below to set the layer tone volume to a value in the range of 40 to 127.
� To scroll the volume setting value: While holding down the SETTING button, use the + (increase) and � (decrease) keys to scroll the volume setting value. Holding down either key changes the setting at high speed. Pressing + and � at the same time automatically selects a volume setting value of 72. � To input the volume setting value: While holding down the SETTING button, use the number input keys to input a two-digit or three-digit volume setting value in the range of 40 to 127. You can input a two digit or a three-digit value. The level you input is applied to the volume setting value when you release the SETTING button. The volume setting does not change if you input a one-digit value or a value that is outside of the allowable range.
B2 C3
B2 C3
+/� keys
Number Input keys
+/� keys
Number Input keys
� A note does not sound when you press a keyboard key at this time.
� A note does not sound when you press a keyboard key at this time.
4
Release the SETTING button to complete the procedure.
4
Release the SETTING button to complete the procedure.
NOTE
� The setting you make for the main tone volume remains in effect even if you change to another tone.
NOTE
� The setting you make for the layer tone volume remains in effect even if you change to another tone.